Locomotive Mudguard Sticker PET Reflective 34x5.5cm Stripe Decal

This mudguard sticker is a single self-adhesive decal made from PET and finished with a reflective stripe pattern. It measures 34cm by 5.5cm, giving a long, narrow format suited to mudguard placement. The sticker is available in black, blue, red, white or yellow, so the stripe detail can be matched to different guard colours or used as a contrasting accent. The reflective style is intended to add a visible stripe line on the mudguard area. Because the source text gives one size only, the 34cm x 5.5cm measurement is the key fit guide. It is a practical decal for riders who want a simple stripe detail on a mudguard, with no additional hardware or fixings described. The PET material forms the sticker base, while the self-adhesive backing allows direct application to a prepared surface.

Features and Construction

The construction is centred on a PET sticker with a reflective finish and a stripe pattern. It is supplied as a self-adhesive decal for mudguard use, in a choice of five colours. The long 34cm length and 5.5cm width define the shape, making it best suited to surfaces that can accept a narrow strip.

Material and Build

The sticker is made from PET, a plastic film material that provides the base for the reflective stripe finish. The self-adhesive backing is part of the sticker construction, so no separate glue or tape is described. The reflective style is stated in the source, and the stripe pattern runs across the sticker face. This is a single decal rather than a multi-piece kit. The PET film is used for the sticker body, and the reflective finish is the visible surface characteristic. No additional protective layers, thickness ratings or weatherproof ratings are given in the source text, so the description stays within the stated material and finish.

Size and Practical Fit

The sticker measures 34cm by 5.5cm. That gives a long, narrow shape intended for mudguard placement. The 5.5cm width is best checked against the flat or gently curved area of the intended mudguard before applying. The 34cm length can run along the guard as a stripe detail. If the mudguard has tight curves, deep recesses or a very short usable area, the sticker may need trimming or may not be suitable without modification. Only this one size is listed, so there is no alternative measurement to choose from. The dimensions are the main guide for whether the decal will sit correctly on the mudguard.

Uses and Placement

Placement is specified as the mudguard, and the stripe pattern is intended to run along that area. The self-adhesive format keeps the application direct, while the reflective style adds a visible stripe finish. The five colour options allow for matching or contrasting looks depending on the guard surface.

Event or Professional Use

For event or professional settings, the sticker can be used to add a reflective stripe detail to a mudguard where a uniform look or visible marking is wanted. The 34cm x 5.5cm size gives a consistent strip length, and the choice of black, blue, red, white or yellow allows the decal to fit different colour schemes. The self-adhesive PET construction means it can be applied to a prepared mudguard surface without additional fixings. It is a single decal, so multiple stickers would be needed if more than one mudguard is to be covered. No specific event, racing or certification use is stated in the source text, so those claims are not made here.

Everyday Home Use

For everyday use, the sticker is a simple way to add a stripe detail to a bike, scooter or similar mudguard. The reflective finish and stripe pattern make the decal visible on the guard area. The self-adhesive backing means it can be positioned by hand after cleaning the surface. The 34cm length can suit a typical mudguard strip, while the 5.5cm width keeps the decal narrow. The colour range allows a practical match or a deliberate contrast. Because only one size is supplied, the fit should be checked before ordering. No additional tools, sealants or specialist equipment are described.

Benefits and Buying Value

The main value lies in the combination of a PET self-adhesive decal, a reflective stripe pattern, a specific 34cm x 5.5cm size and five colour choices. It is a simple single sticker for mudguard placement, with no extra parts described.

Reuse and Low Maintenance

No reuse, repositioning or long-term maintenance claims are made in the source text. The sticker is described as self-adhesive and intended for mudguard placement, so the practical approach is to apply it once to a clean, dry surface and avoid unnecessary peeling or repositioning. The PET material can be wiped with a soft, damp cloth if needed, but no specific cleaning products or methods are stated. Because the reflective finish is part of the sticker surface, abrasive pads or strong solvents are not recommended. These are low-risk, material-based care notes only, not manufacturer instructions.

Why Choose This Product

Choose this sticker if you need a single mudguard decal with a reflective stripe pattern and a listed size of 34cm by 5.5cm. The PET construction and self-adhesive backing keep the format straightforward, and the five colour options cover black, blue, red, white and yellow. It is suited to mudguard placement where a narrow stripe detail is wanted. The source does not state pack quantities beyond the single sticker, so it is best treated as one decal. It also does not include weatherproof ratings, lifespan claims or compatibility details, so those expectations should not be assumed. The clear specifications make it easier to judge whether the size and colour suit the intended mudguard.