T10 3014 33smd Single-sided White LED Licence Plate Light 12V 6.6W 240lm

This single-sided width light is a direct-fit LED replacement for your car's trunk or licence plate illumination. With 33 SMD 3014 chips producing 240 lumens of clear white light at 12V and 6.6W, it upgrades the factory bulb's performance without requiring wiring modifications. The compact 12 by 34mm design fits standard T10 wedge sockets.

Features and Construction

The light is built around a rigid circuit board populated with surface-mount LED chips. Its single-sided layout directs light forward, making it suitable for licence plate lamps, side markers, and trunk lights.

Material and Build

The circuit board acts as both the mechanical substrate and the electrical pathway. It is fitted with 33 pieces of 3014 SMD LED, each rated at 0.2W, providing a total luminous output of 240 lumens. The board is sealed to protect against moisture and vibration in normal automotive use.

Size and Practical Fit

Measuring just 12mm wide by 34mm long, the light fits into the same T10 wedge socket as a standard 5W or 10W incandescent bulb. Before installation, check the depth and clearance within your housing as some fixtures may have limited space for the board-style design.

Uses and Placement

This product is intended for exterior lighting positions where a white light source is required and a T10 base is standard. It is most commonly used as a license plate light but also works in side-marker and trunk lights.

Event or Professional Use

Garages and vehicle workshops can keep these lights as a direct replacement for failed licence plate bulbs. The LED construction means longer service intervals and lower current draw compared to traditional bulbs.

Everyday Home Use

Car owners can replace a dim or blown licence plate bulb with this LED unit in minutes, restoring full illumination for legal compliance and better rear visibility at night.

Benefits and Buying Value

Switching to LED lighting reduces electrical load on the vehicle and provides brighter, more consistent light. This single-sided design is a cost-effective way to modernise standard T10 sockets.

Reuse and Low Maintenance

LED chips do not have a filament and are more resistant to vibration, so the light should last many years under normal driving conditions. There is no routine maintenance required beyond occasional cleaning of the lens.

Why Choose This Product

This light combines a high 240 lumen output with a compact footprint, making it a practical upgrade for older vehicles still using incandescent bulbs. It gives you bright white illumination without complex installation.